FREE Shipping on Kits & Orders Over $299 | Nationwide USA Installation Partners
Design Help / Get a Quote

Phone Order Only

We offer all components necessary to repair, expand, and modify our systems over the phone, email or chat. If you need components listed here then please contact us.

Set Screw 5/16" - 18

5/16" - 18 thread (coarse thread) set screw 3/8" long cup tip stainless steel. Uses a 4mm hex wrench....

¥100 JPY

Standard Zip Ties - (100)

Zip Ties - 8" Light Duty (100pcs). These 50lb test zip ties are black and UV stabilized. Use these ties to secure the poly or welded wire fencing in the Freestanding Cat System and/or the Dog-Proofer ...

¥800 JPY

Spring-Loaded Houdini Cat Fence Arm

Spring-Loaded Houdini Cat Fence Arm. This is an arm only and requires a mounting bracket to affix it to a Free-Standing System post or the Universal Mounting Bracket of the Existing Fence Conversion S...

¥3,200 JPY

1 Ft Length of Poly Fence - 5 ft increments (Various Heights)

Need a Little More Fence for Your Purrfect Enclosure? In the event that you need some additional UV-rated, poly mesh to complete, expand, or repair your Purrfect Fence free-standing or conversion cat ...

¥400 JPY

1 3/8" Diameter Post

1 3/8" Tubing Cut to Size...

¥2,600 JPY

SINGLE Post Kit Add on to Freestanding Fencing System (NO DRIVE CAP)

Sometimes a specific layout will make your Free-Standing Fence System require a couple of extra posts... Our 1-Post Kit contains all the components necessary for (1) complete post assemblies: (1) Spri...

¥13,500 JPY

Heavy Duty Zip Ties (100)

These heavy-duty 120lb test zip ties are black and UV stabilized. Use these ties to secure the poly or welded wire fencing in the Freestanding Cat System and/or the Dog-Proofer Arm Systems. These hea...

¥2,700 JPY

1 Ft Length of Welded Wire Fence - 5 ft increments (Various Heights)

In the event that you need some additional 16 gauge welded wire mesh to complete, expand, or repair your Purrfect Fence free-standing or conversion cat fence, please give us a call to order any amount...

¥400 JPY

4' Height Poly Fence Roll

Our poly mesh fence material is a specially formulated thermoplastic polymer formed into a grid that is both flexible and also very strong. It has a 600lb breaking strength and UV inhibitors that make...

¥9,400 JPY

7.5' Height Poly Fence Roll

Our poly mesh fence material is a specially formulated thermoplastic polymer formed into a grid that is both flexible and also very strong. It has a 600lb breaking strength and UV inhibitors that make...

¥22,200 JPY

Post Cap for 1 3/8in Post

Plastic Post plug-cap for 1 3/8in post...

¥200 JPY

24" Welded Wire Fence Roll

Our welded wire mesh is made of galvanized steel wire that is vinyl-coated for added durability outdoors. The vinyl coating includes UV inhibitors as well. The wire strands on our welded wire mesh hav...

¥13,300 JPY

Ground Stakes (Box of 30)

Ground Stakes (30)...

¥6,800 JPY

Conversion System Arm Mounting Plate

Mounting bracket for the Existing Fence Conversion system...

¥2,000 JPY

Sleeve for 1 3/8" Posts

Sleeve for 1 3/8" Posts...

¥2,800 JPY

Post to Wall Strap for 1 3/8" Posts

Post to Wall Strap...

¥100 JPY

Arm to Wall Strap

Arm to Wall Strap...

¥100 JPY

Free-Standing System Arm Mounting for 1 3/8" Post

Free-Standing System Arm Mounting for 1 3/8" Post. Requires (2) SETSCREW....

¥1,900 JPY

Driving Cap for 1 3/8" Sleeve

Driving Cap for 1 3/8" Sleeve...

¥2,100 JPY

Conv Sys Shorter Fences Arm Extension Tube

36" long extension tube for the Conversion System for Shorter Fences. Heavy walled tube having one end swaged to fit into arm bottom with black powder coating....

¥2,700 JPY

Self-Drilling and Tapping Screw

Self drilling and tapping screw 3/4" long zinc finish. Uses 5/16" hex head driver. ...

¥100 JPY

Single Ground Stake

1 ground stake (loose) for the Free-Standing System...

¥400 JPY

Double-Bubble Single Use Epoxy Pack+ Stir Stick

Epoxy Pack used for securing the Conversion System for Shorter Fences "Arm Extension Tube" to the conversion arm. One pack good for (4) tube-arm connections....

¥400 JPY

Hex Wrench for Set Screws

4mm Hex Wrench / Allen Key for the Set Screws....

¥100 JPY

6' Height Poly Fence Roll

Our poly mesh fence material is a specially formulated thermoplastic polymer formed into a grid that is both flexible and also very strong. It has a 600lb breaking strength and UV inhibitors that make...

¥20,400 JPY

5/16in Driver Bit for Self-Tapping Screws

5/16in drill Driver Bit for Self-Tapping Screws ...

¥700 JPY

SINGLE Heavy Duty (1 5/8) Post Kit Add on to Freestanding Fencing System (NO DRIVE CAP)

Sometimes a specific layout will make your Free-Standing Fence System require a couple of extra posts... Our 1-Post Kit contains all the components necessary for (1) complete heavy duty 1 5/8" post as...

¥17,500 JPY

Gate Corner for 1 3/8" Gate Frame

90 degree tube connector for 1 3/8" posts. Used as corner ...

¥1,700 JPY

Driving Cap for Sleeve for 1 5/8" HD Posts

Driving Cap to fit the sleeve used for the 1 5/8" diameter Heavy Duty Posts....

¥3,100 JPY

Steel Welded Wire Fence 42" Height

Black vinyl-coated galvanized steel welded wire with 1.75" x 1.75" square openings.  Available in roll: 42 in x 50 ft or 100 ft...

¥22,200 JPY

46"(Gross Length) Post Swage, 40" (Net Length - Excluding Swage) for 1 3/8" Posts

46" Swaged Post Half. Used with POST46 to make an 86in long post...

¥3,900 JPY

Free-Standing System Arm Mounting for 1 5/8" HD Post

Free-Standing System Arm Mounting for 1 3/8" Post. Requires (2) SETSCREW....

¥2,300 JPY

Hinge Set for 1 3/8" gate on 1 3/8" post

(2) sets of hinges to hang a 1 3/8" gate frame from a 1 3/8" gate post black powder coated, bolts and nuts included....

¥3,600 JPY

End Rail Clamp - Pack of 2

Connects 1-3/8 to 1-3/8 posts...

¥2,600 JPY

Heavy Duty 1 3/8"Foot Pad

Heavy Duty Foot Pad 6" x 6" base with 6" Tall shaft, .125" wall thickness tubing and .1875 wall thickness of plate, two through holes in tubing, supplied with 2 self-tapping screws, black powder-coate...

¥7,000 JPY

46" Post Half

46" Post Half used with POST46S to make an 86in long post...

¥3,500 JPY

3-Way Connector for 1 3/8" Post

3-Way connector for 1 3/8" posts....

¥2,900 JPY

Sleeve for 1 5/8" Heavy Duty Posts

Sleeve for the 1 5/8" Heavy Duty Posts 30" long....

¥3,300 JPY

Post Cap for 1 5/8in Post black

Post cap for 1 5/8" diameter post; cast metal black powder coated....

¥300 JPY

Gate Latch for Light Duty Access Gates

Gate latch for Light duty gates for both 30" and 60"....

¥2,000 JPY

Cut Charge

¥700 JPY

4-Way Connector for 1 3/8" Post

4- Way connector for 1 3/8" posts....

¥4,300 JPY

Epoxy Syringe for 4+ Conv Sys for Shorter Fences

Syringe of epoxy used for securing the Conversion System for Shorter Fences "Arm Extension Tube" to the conversion arm. One syringe good for 4-8 kits....

¥1,800 JPY
¥4,400 JPY

1 5/8" Heavy Duty Post 86" Black

1 5/8" Heavy Duty Post 86" long with a black powder coat finish. It has a wall thickness of 0.065"...

¥8,100 JPY
1