5/16" - 18 thread (coarse thread) set screw 3/8" long cup tip stainless steel. Uses a 4mm hex wrench....
Sometimes a specific layout will make your Free-Standing Fence System require a couple of extra posts... Our 1-Post Kit contains all the components necessary for (1) complete post assemblies: (1) Spri...
4ft high strong poly fence. For the: Existing Fence Conversion System for Cats All Dog Arm Systems FENCE4X100 - 45" x 105' Long FENCE4X200 - 45" x 205' Long FENCE4X330 - 45" x 305' Long *The actu...
In the event that you need some additional 16 gauge welded wire mesh to complete, expand, or repair your Purrfect Fence free-standing or conversion cat fence, please give us a call to order any amount...
Black vinyl-coated galvanized steel welded wire with 1.75" x 1.75" square openings. Available in roll: 24 in x 50 ft or 100 ft...
Free-Standing System Arm Mounting for 1 3/8" Post. Requires (2) SETSCREW....
Mounting bracket for the Existing Fence Conversion system...
Each 100' Existing Fence Conversion System for Shorter Fences comes with (12) arm assemblies and extension tubes. Depending on the configuration of your existing fence you may require more of the arms...
Self drilling and tapping screw 3/4" long zinc finish. Uses 5/16" hex head driver. ...
36" long extension tube for the Conversion System for Shorter Fences. Heavy walled tube having one end swaged to fit into arm bottom with black powder coating....
Epoxy Pack used for securing the Conversion System for Shorter Fences "Arm Extension Tube" to the conversion arm. One pack good for (4) tube-arm connections....
6' height Heavy Duty fence black poly UV stabilized. Used primarily as the fence for the Conversion System for Shorter Fences....
5/16in drill Driver Bit for Self-Tapping Screws ...
Driving Cap to fit the sleeve used for the 1 5/8" diameter Heavy Duty Posts....
Sometimes a specific layout will make your Free-Standing Fence System require a couple of extra posts... Our 1-Post Kit contains all the components necessary for (1) complete heavy duty 1 5/8" post as...
90 degree tube connector for 1 3/8" posts. Used as corner ...
Black vinyl-coated galvanized steel welded wire with 1.75" x 1.75" square openings. Available in roll: 42 in x 50 ft or 100 ft...
46" Swaged Post Half. Used with POST46 to make an 86in long post...
Free-Standing System Arm Mounting for 1 3/8" Post. Requires (2) SETSCREW....
(2) sets of hinges to hang a 1 3/8" gate frame from a 1 3/8" gate post black powder coated, bolts and nuts included....
Post cap for 1 5/8" diameter post; cast metal black powder coated....
Gate latch for Light duty gates for both 30" and 60"....
Syringe of epoxy used for securing the Conversion System for Shorter Fences "Arm Extension Tube" to the conversion arm. One syringe good for 4-8 kits....
Heavy Duty Foot Pad 6" x 6" base with 6" Tall shaft, .125" wall thickness tubing and .1875 wall thickness of plate, two through holes in tubing, supplied with 2 self-tapping screws, black powder-coate...
1 5/8" Heavy Duty Post 86" long with a black powder coat finish. It has a wall thickness of 0.065"...
The hub and pole assembly for the Purrfect Playtent Box - 36x6x6 6lbs...
Gate latch for 1 3/8" gate to 1 3/8" post. Allows a gap of less than 1" between gate frame and post. Requires 5/16" hole through gate tube....
The welded wire in this kit is 1" x 1" 16 gauge galvanized steel with a black powder coat finish. The wire mesh is welded as plain steel and galvanized as a mesh. ...
